How To Reset The Remote - RCA Scenium L50000 User Manual

Chapter 3
Chapter 3
ON•OFF
DIRECTV
VCR
1
VCR
AUX
2
AUD
M1 M3
M2
L1
L2
FRONT
MUTE
CH +
VOL - VOL +
REAR
CH -
FORMAT
TEST
GUIDE
LEVEL - OK
MENU
PROGRAM
1 2 3
4 5 6
7 8 9
INPUT 0 ANT
FUNCTION
REV PLAY FWD
REC STOP PAUSE
CH
SWAP
CTRL
PIP WHO
DELAY
DSP DSP
ON•OFF MODE
58
The Remote Control
The Remote Control

How to Reset the Remote

Operations Reset
Operations reset clears all programming from the remote control EXCEPT the
buttons you've programmed to operate other components.
TV
1. Press and hold
DVD
remote's display.
2. Step through the programming menu by pressing the down arrow button until
L3
OPS REST appears in the remote's display, then press the OK button.
SKIP
3. Once you press the OK button, CLR SETUP appears until the OK button is
pressed again.
CENTER 4. After the OK button has been pressed, the remote will perform a complete
GO
BACK
Operations Reset. Once the Operations Reset is complete the remote will exit
AM•FM
the Operations Reset mode and return to its normal operation.
INFO
Note: Press the CLEAR button at any time to exit. EXIT SETUP will appear and
LEVEL +
the remote will return to its normal operation.
CLEAR
Manufacturing Reset
The Manufacturing Reset returns your remote to the way it was when it was packed
with product at the manufacturing facility. All programming will be cleared.
1. Press and hold
remote's display.
2. Immediately press and release the RECORD button. The remote automatically
enters the programming mode where the Manufacturing Reset will be accessed.
3. Step through the programming menu by pressing the down arrow button until
MFR RESET appears in the remote's display, then press the OK button.
(the backlight button) until CODE SET appears in the
(the backlight button) until CODE SET appears in the