Pedal Bypass Loops - Decibel Eleven Switch Doctor Operation Manuals

MIDI CC or NOTE messages from Direct Mode, you can enable only loops and amp
switches on one single page (see SETUP – d . Ty on page 21)]
Saving instant access switches to a preset
When in Direct Mode, all of the switch and loop states can easily be saved as a preset
by pressing and holding the EDIT switch until the
scroll SAVE followed by the current bank number. The
from left to right. Select the preset number to save to by first selecting the bank
number using the ▲ and ▼ switches. Then, use the bottom row switches to select the
desired preset within the bank (A,B,C,D). Once the desired bank and preset are
selected, press the EDIT switch again and the display will scroll SAVE followed by
alternating n and Y. Press the + (y)switch to save, or press the – (n) switch to
return to Direct Mode without saving.
Note: if a preset is selected, and it is desired that a different selection be made, press
the selected preset switch again to de-select it.
MIDI Note messages triggered in Direct Mode are not saved to presets. To save Note
messages to a preset, they must be programmed in PRESET PROGRAMMING (see
page 22)

Pedal Bypass Loops

The pedal bypass loops are typically used for inserting or bypassing pedal effects. This
acts to turn each pedal on or off. By having the pedals in the bypass loops, presets can
be created which can turn on and off multiple pedals with a single button press.
The bypass loops use mechanical relays to provide the cleanest and most direct
method of effect bypassing. The bypass loops are wired in series. If there is nothing
connected to a loop and it is switched on, the signal path will be broken.
A loop can be used for silent (muted) tuning by connecting only the SEND of a loop
to the tuner input, and leaving the loop RETURN jack empty.
The 4 th pedal bypass loop can also be configured as a 3
can be used for additional amp control, tremolo, reverb, etc. (for details see
CONNECTIONS – Pedal Loops on page 3).
True Bypass
Passive guitar pickups are low level, high impedance sources. They are easily loaded
down by all the various cable and connections required when using multiple effect
pedals, resulting in a loss of high frequency response.
blue EDIT LED lights. The display will
blue preset LEDs will sequence
rd control function switch which
14