Decibel Eleven Switch Doctor Operation Manuals page 22

G.Pr (Global Preset)
The Global Preset can be used as a "default sound" preset. Preset number 128 (bank
32, preset D) is used as the Global Preset. But, if enabled here, this preset can be
activated from any active bank of the Switch Doctor. See the OPERATION BASICS-
Preset Mode on page 11 for more details.
Press ► to display the current setting. Use the + / - switches to select yes or nO.
SPL (Split Preset Mode)
The Split Preset Mode is an alternate Preset Mode that uses the top row switches for
selecting presets and the bottom row switches for instant access control. See the
OPERATION BASICS - Split Mode on page 12 for more details.
Press ► to display the current enabled status. Use the + / - switches to select yes or
nO. Press ► again to display the type of instant access switches selected. The options
are LPS for loops, CCA or CCB for MIDI Continuous Controllers. [NOTE: the MIDI
Continuous Controllers, CCA or CCb, must be defined and enabled before they can be
selected here (see page 18)] Press ► again to display the preset selection type –
instant (INS) or deferred (dEF).
dSP (Display)
The Display setting provides an alternate method of displaying the bank/preset when
in Preset Mode.
Press ► to display the current setting. Select BANK ( ban) to show the bank number
in the numeric display in Preset Mode (default). Select PRESET (pre) to show the
actual preset numbers 001 – 128 in the numeric display. This can be useful when
using the Switch Doctor as a simple MIDI controller since the preset number displayed
is the same as the MIDI Program Change number transmitted* (when PC1 is enabled).
* MIDI Program Changes 1 to 128 are transmitted as 0 to 127
b.ST (Bank Limit (stop))
The Bank Limit setting provides a method of limiting the number of banks accessible
when in preset mode. For example, if you only use 8 banks, you can set the limit to 8
and then you will not need to scroll through unused banks in preset mode.
Press ► to display the current setting. Use the + / - switches to select the number of
banks accessible (1..32)
20