Advertisement
Quick Links
Introduction
The Hot Stone Deluxe pedal power supply was specifically designed to meet the higher power
requirements of modern digital effect pedals while providing sufficient outputs to power any
battery operated pedal. All outputs are completely isolated, filtered and regulated to provide
clean, ripple free DC voltage. Isolation and short circuit protection on each output ensures that
there will be no hum, noise, or pedal interaction.
The Hot Stone Deluxe provides:
Eight isolated outputs with a total, ripple-free current of 1600mA.
Two high current, 400mA, 9 and/or 12V outputs capable of powering Eventide™ Factor,
Strymon™, Boss™ Twin, TC™ Nova, Line6™ modelers.
Two medium current, 9 or 12V outputs capable of 200mA each.
Two variable voltage outputs for simulating used carbon batteries.
Custom magnetically shielded toroidal transformer
Short circuit protection on all outlets
Box Contents
Hot Stone Deluxe
AC power cord
(8) DC cables with 5.5x2.1mm black barrel connectors
(2) DC cables with 5.5x2.5mm blue barrel connector
(1) DC cable with 3.5mm mini plug
Manual and Warranty
The Hot Stone is a linear power supply designed for low noise and high
output current. Higher currents require higher heat dissipation. The Hot
Stone is designed to radiate heat. This is normal to its operation. However,
care should be taken to keep the top cover clear and freely exposed to air.
Declaration of Conformity
Decibel Eleven declares that this product complies with the European Union Council Directives and Standards
requirements for the Low Voltage Directive (2006/95/EC) and the EMC Directive (2004/108/EC).
The European Union's (EU) WEEE (Waste Electrical and Electronic Equipment) directive is for waste management of
electronic equipment sold into EU countries.The symbol on our product (shown) indicates that this product must not
be disposed of with other waste. It is the user's responsibility to dispose of their waste electrical and electronic
equipment by handing it over to an approved reprocessor or recycler. For more information on proper recycling,
please contact your local city office or Decibel Eleven distributor.
DB-11 HOT STONE OPERATING TEMPERATURE
DECIBEL11.COM
Advertisement
Related Manuals for Decibel Eleven Hot Stone Deluxe
Summary of Contents for Decibel Eleven Hot Stone Deluxe
- Page 1 Introduction The Hot Stone Deluxe pedal power supply was specifically designed to meet the higher power requirements of modern digital effect pedals while providing sufficient outputs to power any battery operated pedal. All outputs are completely isolated, filtered and regulated to provide clean, ripple free DC voltage.
- Page 2 AC Input Voltage Switch – set to proper voltage prior to plugging in the Hot Stone FUSE REPLACEMENT The Hot Stone Deluxe has a replaceable cartridge type fuse. Should your Hot Stone Deluxe stop working, where there is no power being supplied to your pedals and the green power indicator on the Hot Stone front panel is not lit, it is recommended to check the condition of the fuse.
- Page 3 Output Configuration The Hot Stone Deluxe has 8 isolated outputs. All outputs are standard barrel type connectors wired “center negative”, which means the outside barrel is +V. This is the standard wiring for most guitar effect pedals. However, there are exceptions. Always check the label on the pedal before connecting, and use a polarity reversal cable if needed (see DC Cables section).
- Page 4 Pedal Specifics BOSS™ pedals are generally powered by one of two types of voltage, identified on the label as “PSA” or “ACA”. Most all BOSS™ pedals are “PSA” type and require standard 9VDC. “ACA” pedals will operate correctly using any 12VDC output on the Hot Stone. BOSS™ Twin pedals require higher current and can be operated from output 5 or 6 at 9V, or output 1 or 2 at 9V.