Working With Automated Systems; Turning Confirmation Prompts On/Off - Chrysler RER Owner's Manual

Working with Automated Systems

This method is designed to be used in instances where
one generally has to press numbers on the cellular phone
keypad while navigating through an automated tele-
phony system.
You can use your UConnect™ system to access a voice-
mail system or an automated service, such as, paging
service or automated customer service. Some services
require immediate response selection, in some instances,
that may be too quick for use of UConnect™ system.
When calling a number with your UConnect™ system
that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can push
the VR hard-key and say "Send" followed by the number
sequence.
For example, if required to enter your pin number
followed with a pound 3 7 4 6 #.
1. Press the VR button
2. Say SEND 3 7 4 6 #
For example, if your pin number is stored in the address
book as a voice tag name.
1. Press the VR button
2. Say SEND NAME and your pin name . Example:
SEND NAME PIN
This is also to be used to navigate through an automated
customer service center menu structure and to leave a
number on a pager.

Turning Confirmation Prompts On/Off

Turning confirmation prompts off will stop the system
from confirming your choices (e.g. the UConnect™ sys-
tem will not repeat a phone number before you dial it).
1. Press the UConnect™ hard-key to begin.
NAVIGATION 113
1