Automatic Transfer Call To Uconnect™ System; List All Paired Cellular Phone Names; Select Another Cellular Phone - Chrysler RER Owner's Manual

116 NAVIGATION
1. Press the UConnect™ hard-key.
The navigation radio transfers the call immediately, and
you can continue your call on the cellphone.
Automatic Transfer Call to UConnect™ System
If you have an ongoing call on a cellphone which was
paired with the UConnect System before, and the navi-
gation radio is off, turn on the ignition and allow the
UConnect system to automatically transfer the call. This
may take a few seconds.

List All Paired Cellular Phone Names

1. Press the UConnect™ hard-key to begin.
2. Wait for the beep.
3. Say UCONNECT SETUP.
4. After the following beep, say PHONE PAIRING.
5. After the following beep, say LIST PAIRED PHONES.
6. The UConnect™ system will play the phone names of
all paired cellular phones in order from the highest to the
lowest priority.
To "select" or "delete" a paired phone being announced,
press the VR hard-key and say SELECT or DELETE. Also,
see next two sections for alternate way of doing this.

Select Another Cellular Phone

You may select phones via touch screen in the Paired
Devices menu. (Refer to the Getting Started section in this
manual for more details).
This feature allows you to select and start using another
phone with the UConnect™ system.
The phone must have been previously paired to the
UConnect™ system that you want to use it with.
1. Press the UConnect™ hard-key to begin.
2. Wait for the beep.