Connect Bluetooth Phone - If Equipped - Chrysler RER Owner's Manual

2. Select the radio band by touching either the AM, FM
or SAT soft-key.
3. Either press the SEEK up/down hard-keys, or touch
the SCAN soft-key, DIRECT TUNE soft-key, or the left
and right arrows to change the currently playing station.
4. Touch and hold one of the PRESET soft-keys in the list
to the right, until you hear a confirmation beep (Approxi-
mately 4 seconds).
You can use the PAGE soft-keys to scroll through
the list of presets.
NOTE: If the preset list is not displayed. Press the LIST
soft-key located in the bottom line of the screen.
You can use the FULLSCREEN soft-key to toggle
between full- and split screen mode. Long preset
names are displayed in fullscreen mode.
You can use the BACK soft-key to switch to the
previous menu.
Connect Bluetooth Phone – If Equipped
1. Press the MENU hard-key on the right side of the
radio.
2. Then touch the System Setup soft-key to get to the
System Setup menu.
NAVIGATION 23
1