Pair (Link) To A Cellular Phone - Chrysler RER Owner's Manual

102 NAVIGATION

Pair (Link) to a Cellular Phone

To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone (re-
fer to "Introduction" section to learn about the phone
type). To complete the pairing process, you will need to
reference your cellular phone owner's manual. One of
the following vehicle specific websites may also provide
detailed instructions for pairing with the brand of phone
that you have:
www.chrysler.com/mygig
Phone pairing can either be done using the touch screen
(see Getting Started section in this manual) or using voice
commands.
Pairing will walk you through a series of steps that will
establish a connection between your handset and the
UConnect™ system in the vehicle.
Once set up, you do not need to re- pair your phone with
each use. However, every new phone must be paired
before it can be used.
The following are general phone to UConnect™ System
voice pairing instructions:
1. Press the UConnect™ hard-key to begin.
2. Wait for the beep.
3. Say PHONE PAIRING.
4. When prompted, after the beep, say PAIR A PHONE
and follow the audible prompts.
5. You will be asked to say a four-digit pin number
which you will later need to enter into your cellular. You
can enter any four-digit pin number. You will not need to
remember this pin number after the initial pairing pro-
cess.