Phone And Network Status Indicators; Dial Using The Cellular Phone Keypad - Chrysler RER Owner's Manual

114 NAVIGATION
2. Wait for the beep.
3. Say UCONNECT SETUP.
4. After the "Ready" prompt and the following beep, say
CONFIRMATION PROMPTS.
5. The UConnect™ system will play the current confir-
mation prompt status and you will be given the choice to
change it.

Phone and Network Status Indicators

If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnect™ system will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnect™. The status is given for roaming,
network signal strength, phone battery strength, etc.

Dial Using the Cellular Phone Keypad

You can dial a phone number with your cellular phone
keypad and still use the UConnect™ system (while
dialing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth™ cellular
phone, the audio will be played through your vehicle's
audio system. The UConnect™ system will work the
same as if you dial the number using voice recognition.
NOTE: Certain brands of mobile phones do not send the
dial ring to the UConnect™ system to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number, the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.