Bryton Rider 60 Manual page 4

• To enable the Bluetooth function, go to Settings >
"Bluetooth", then select "ON", then switch to visible to all
nearby Bluetooth devices.
IMPORTANT:
the Rider 60 is pairing with your Android phone.
b. Pairing Rider 60 with your mobile phone
i. On your Rider 60, tap the
Bluetooth > Bluetooth. Then tap On to
enable the Bluetooth function. Please
wait to allow the Rider 60 to search for
your mobile phone.
ii. Once your mobile phone appears on
the list, select it and wait for a few
minutes to allow the Rider 60 to pair
with your mobile phone.
iii. If prompted for a PIN, enter the assigned
PIN code on your mobile phone. The
Rider 60 will show the pairing status.
For the pairing status, please see the descriptions below:
IMPORTANT:
If you encounter connecting problem, please click the problem
device on the list and select forget device and search again.
4
Please remain at the Bluetooth screen while
Your Rider 60 is connected to this device.
Your Rider 60 has been paired with this
device before, but it is currently not
connected.
Your Rider 60 doesn't pair with this device.
icon >
Rider 60 Bluetooth