Bryton Rider 60 Manual page 2

Bluetooth
Rider 60 allows you to connect with two Bluetooth devices at the
same time. Before getting the voice guidance or uploading your
rides via Bluetooth, please follow these instructions:
IMPORTANT:
Rider 60.
1. Enabling the voice guidance via Bluetooth headset
a. Enable the headset in pairing mode
Press and hold the headsets center "Call" or "Power" button
for several seconds. Most headsets have an indicator light
that will remain steadily lit or flash rapidly to show the
device is ready for pairing. Release the button when this
occurs. The headset is now in pairing mode.
b. Pairing Rider 60 with your headset
i. On your Rider 60,tap the
Bluetooth. Then tap On to enable the Bluetooth function.
Please wait for a few minutes to allow the Rider 60 to
search for your headset.
ii. Once your headset appears on the list, select it and wait
to allow the Rider 60 to pair with your headset.
2
Always connect your Bluetooth device from
icon > Bluetooth >
Rider 60 Bluetooth