Select Display Mode; Alarm Function - Silvercrest KH 2030 Operating Instructions Manual

Note:
In order to completely deactivate the date alarm set a date that is in the
past!
Setting 12/24 hour mode
MODE
• Press eight times. The screen shows the"24 HR" message for 24-
hour mode.
UP
• Press the
DOWN
• Press the
"12HR" is displayed on the screen. In the afternoon in addition PM is
shown on the screen.

Select display mode

You can select which information is shown on the screen when the radio is
switched off.
The selected mode is indicated by a corresponding symbol on the screen.
When the radio is switched off, select the display mode by repeatedly
FINE
pressing the
Symbol on the screen display mode
CLK
CITY
DATE
CIT DAT

Alarm function

The world receiver provides two alarms that can be set independently of
one another, AL1 and AL2. For both, you can set:
...whether the alarm should operate on every day of the week or only
from Monday to Friday;
... whether you wish to be woken by the alarm tone or the radio.
button to set the 24 hour mode.
button to set the 12 hour mode.
button in accordance with the following table:
only the time is displayed
The time and world time are shown in succession
The time and date are shown in succession
the time, date and world time are shown in succession
- 15 -