Network Hardware; Network Cable Connector Types - Raymarine CP370 Installation Instructions Manual

10.3 Network hardware

Part
num-
Item ber
HS5 RayNet A80007 5–port switch for network
network switch
RJ45 SeaTalk hs E55058 8–port switch for network
network switch
RJ45 SeaTalk hs E55060 • Enables direct connection
crossover coupler
Ethernet RJ45 R32142 • Enables direct connection
coupler
Spares and accessories
Notes
connection of multiple
devices featuring RayNet
connectors. Equipment with
RJ45 SeaTalk hs connectors
can also be connected using
suitable adapter cables.
connection of multiple
SeaTalk hs devices featuring
RJ45 connectors.
of RJ45 SeaTalk hs devices
to smaller systems where
a switch is not required.
• Enables the connection of
RJ45 SeaTalk hs devices
to a HS5 RayNet network
switch (in conjunction with
suitable adapter cables).
• Enables 2 RJ45 SeaTalk
cables to be connected
together to extend the
length of the cabling.
Recommended for internal
installations.
of RJ45 SeaTalk hs devices
to smaller systems where
a switch is not required.
• Enables the connection of
RJ45 SeaTalk hs devices
to a HS5 RayNet network
switch (in conjunction with
suitable adapter cables).
• Enables 2 RJ45 SeaTalk
cables to be connected
together to extend the
length of the cabling.
Recommended for external
installations.

10.4 Network cable connector types

There are 2 types of network cable connector —
SeaTalk hs and RayNet.
hs
hs
SeaTalk hs connector — used for
connecting SeaTalk hs devices to
a Raymarine network switch via
SeaTalk hs cables.
RayNet connector — used for
connecting Raymarine network
switches and SeaTalk hs devices to
the multifunction display via RayNet
cables. Also required for connecting a
crossover coupler if only one device
is being connected to the display's
Network connector.
53