Installation Checklist; Required Additional Components - Raymarine CP370 Installation Instructions Manual

3.1 Installation checklist

Installation includes the following activities:
Installation Task
1 Plan your system.
2 Obtain all required equipment and tools.
3 Site all equipment.
4 Route all cables.
5 Drill cable and mounting holes.
6 Make all connections into equipment.
7
Secure all equipment in place.
8 Power on and test the system.
Schematic diagram
A schematic diagram is an essential part of planning
any installation. It is also useful for any future
additions or maintenance of the system. The
diagram should include:
• Location of all components.
• Connectors, cable types, routes and lengths.
16

3.2 Required additional components

This product forms part of a system of electronics
and requires the following additional components for
full operation.
• CP370: For a list of compatible traditional
transducers refer to
transducers.
• CP470: For a list of compatible CHIRP broadband
transducers refer to
broadband transducers.
For a list of transducer cables refer to
and accessories.
• Compatible Raymarine multifunction display.
Refer to 3.3 Compatible multifunction displays
a list of compatible products.
• Data cables. Refer to
connections for suitable cables. Some installations
may also require extensions to data, power or
transducer cables. Refer to the
and connections and
accessories sections for more information.
3.4 CP370 compatible
3.5 CP470 compatible CHIRP
10.1 Spares
Chapter 4 Cables and
Chapter 4 Cables
Chapter 10 Spares and
CP370 / CP470
for