SD Card
0 Carry out the SD card test.
0 Make sure that the SD card is already inserted.
Tap "SD Card".
1
Automatic judgment is done and the test result appears on the menu screen.
Ethernet
0 Make sure that the LAN cable (DHCP) is already connected.
0 Once success of this test, if you need to test again, perform reboot, then test again.
Tap "Ethernet"
Automatic judgment is done and the test result
appears on the menu screen.
1
NOTE: If LAN cable is not connected or Ethernet
is set to off in Stteings mode, right screen
appears.
MAC Address
0 Carry out the MAC address test.
Tap "MAC Address".
1
Automatic judgment is done and the test result appears on the menu screen.
– 21 –
V-R200 / VER.2