Casio EX-843 Service Manual page 17

1-3.
About the Test Application
The test application runs.
Function
Red frame
Set Serial Number
Set MAC Address
SDK
Firmware Update
TouchPanel Calibration
Auto-Run
Output Result
Settings
Exit
Test result "OK"
To interrupt the test item being tested, tap the part indicated by the red frame at the bottom of the screen.
Description
Test items
TIPS: "CF Bench" is excluded from the test item.
Checking and registering the serial number
TIPS: Carry out when the main PCB is replaced with a
new one.
Not used
Not used
Updating the fi rmware
TIPS: This item is not used here.
Touch panel calibration
TIPS: Carry out this item depending on the situation.
Continuous execution of the test items
Printing the test results and outputting the result fi le
Launching the Android settings screen
Closing the test application
Tap the black belt portion, to display marks.
Test result "NG"
– 15 –
V-R200 / VER.2
Refer to
1-5. Test Method
1-6. Checking and
Registering the Serial
Number