Loading The Film - Canon A-1 Instructions Manual

Film Loading
The Canon A-1 accepts color or black and
white film in standard 35mm cartridges.
'When loading and unloading film, avoid
direct sunlight and take care not to touch
the shutter curtain, the film
'rails
or the
pressure plate.
To load the film, first fold out the rewind
crank and sharply pull up the rewind knob .
The camera's back cover will pop open. Put
the cartridge into the film cartridge chamber
so that the protruding part of the spool is on
the bottom an d push down and rotate the
rewind knob until it drops into its fully-
seated position. Now pull th e film leader
across the camera and insert the tip up to at
least the first perforation of the film into
any slot of the multi-slot take-up spool. Ad-
vance the film once, making sure the film
sprocket holes are engaged with the teeth of
the film transport sprocket.
-2 6 -
Check to sec that the cartridge is in a
fully-sea ted position and that the film is
taut.
lf
there is film slack, gently turn the
rewind crank clockwise until it stops. Snap
the back cover shut. Gently tum the rewind
crank in the direction of the arrow
io
J.ake
up film slack and then fold the rewind crank
back in.
Switch the AE mode selector to T v and tum
the AT dial to a fast shutter speed. Now
m ake two blank shots, turning the film
advance lever and releasing the shutter, so
that th e frame counter advances from "S" to
"O". While doing this, keep an eye on the
rewind knob. lf it rotates, the film is
properly loaded. If it docs not rotate,
chances arc that the film is sagging or the
film perforations are not properly en1:,raged in
the take-up spool and film transport
sprocket. If
the rewind knob still does not
rotate once you have gently turned the