RabbitCore RCM4500W User Manual page 97

Table B-4. RCM4510W Prototyping Board Jumper Configurations (continued)
Header Description
LN5 buffer/filter to
JP20
RCM4510W
LN6 buffer/filter to
JP21
RCM4510W
LN7 buffer/filter to
JP22
RCM4510W
JP23 LN4_IN–LN6_IN
JP24 LN0_IN–LN3_IN
JP25 Thermistor Location
NOTE: Jumper connections JP3–JP10, JP12, JP14, JP16, JP18, JP23, and JP24 are made using 0
 surface-mounted resistors. Jumper connections JP11, JP13, JP15, JP17, and JP19–JP22 are
made using 470  surface-mounted resistors.
User's Manual
Pins Connected
1–2
1–2
1–2
1–2 Tied to analog ground
2–3 Tied to VREF
1–2 Tied to analog ground
2–3 Tied to VREF
1–2
Factory
Default
Connected
Connected
Connected
×
×
n.c.
92