Dynamic C Function Calls; Where Do I Go From Here - RabbitCore RCM4500W User Manual

6.4 Dynamic C Function Calls

Function calls for use with the XBee RF modules are in the Dynamic C
LIB\Rabbit4000\XBee\
library. These ZigBee specific function calls are described in An Introduction to
XBEE_API.LIB
ZigBee, which is included in the online documentation set.

6.5 Where Do I Go From Here?

NOTE: If you purchased your RCM4510W through a distributor or through a Rabbit partner, con-
tact the distributor or partner first for technical support.
If there are any problems at this point:
• Use the Dynamic C Help menu to get further assistance with Dynamic C.
• Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/ and at
www.rabbitcom/forums/.
• Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample programs ran fine, you are now ready to go on.
An Introduction to ZigBee provides background information on the ZigBee protocol, and is
available on the CD and on our Web site.
®
Digi's XBee OEM RF Modules provides complete information for the XBee RF module used on
the RCM4510W RabbitCore modules, provides background information on the ZigBee PRO proto-
col, and is available at ftp1.digi.com/support/documentation/90000976_a.pdf..
User's Manual 64