Advertisement
If the signal transmission is long-distance , 512 signal amplifier must be added.
DMX512 signal controller connect to the input of the amplifier first, then connect to
the fixture from its output,couple with the terminal plug last.
1 Do not use two separate output connection, if connect the branch separating
consecutive DMX512 signal amplifier must be used to separate. 2 Please use the
shielded twisted-pair cable,standard microphone cable can not be reliably
controlled long-distance data.
6：AC POWER
6.1Fuse
power
fuse
100-240v~
8A 6*30 main fuse
6.2 Power Connection
If the external flexible cable or cord of this light is damaged, the line is up to the
manufacturer or its service agent or a similar qualified person to replace, in order
to avoid danger. Connect the power supply personnel must have the appropriate
qualifications before proceeding, you must make sure you are using the power
supply voltage matches the voltage identified and have overload or leakage
protection.
1.Directly connect the device to the power supply, do not connect to the silicon box
dimming system, otherwise damage to the equipment.
7:Lamp
Advertisement
