Advertisement
fully rotated 90 degrees clockwise to lock fastener.
5.2Fixed equipment
1. Before installing fixtures,must verified rigging equipments are not damaged,and
can bear at least 10 times of light's weight. Check the building can be beared at
least 10 times of total weights of light, fixture, and cable accessories.
2.Insert the locked hook fastener into base mounting holes horizontally, grab the
handle clockwise 90 degrees fasteners, in the same way to install a second
fastener,make sure the fastener is fastened under the light base.
3.If truss can be lifted， the equipment can be directly clamped from flight case
and locked fixture base. Then hung on the light and using safety rope fixed it.
Before rising the light to right height, connect the power cord and signal cable.
Note: add a safety rope attached the light's base insurance shelf, do not connect
the device handle.
Advertisement
