Advertisement
5.3 Data cable
Data cable is DMX512 signal
Note: Signal line connections is X-type connector。
X-type connector-----If the external flexible cable or cord of this light is damaged,
please replace professional cable or cord from the manufacture or its agent.Lights'
DMX input and output connects to a three-pin XLR and five-pin XLR insert, first pin
is grounded,then negative signal is second pin, third pin connects to the positive
polarity signal, fourth and fifth are empty.In order to prevent reception reflection
and interference control signal,a terminal plug must be installed on the first branch
of the connected device last 3-pin output jack.
controller is connects to the nearest input XLR 3-pin, then from the output of the
device connects to the input of the next device,continuous connection one by one,
the final output data cable terminal equipment plug one end into the
terminal.
Advertisement
