Advertisement
Quick Links
Advertisement
Related Manuals for Elan CAB-330-MULTI
Summary of Contents for Elan CAB-330-MULTI
- Page 1 Beam | Spot | Wash Forew o rd Thanks for choosing CAB-330-MULTI products, it is the result of the latest , independent , research and development o f high-grade quality. Compared with other same power 15R Lights, it 's more lightweight...
-
Page 2: Table Of Contents
CAB-330-MULTI ha s a super high and super long distance range, also has 14 gobos with open circle copper gobo wheel +9 three-dimensional gobos + white(changeable), a frost lens,13 color with white color wheel, and with a prism effects of 8 facet prism + T shaped prism. -
Page 3: 1:Safety Tips
9:CHANNEL--------------------------------------------------------------19-21 10:FAILURE ANALYSIS & RESOLUTION----------------------------20-21 11:CLEAN LAMP-----------------------------------------------------------22 1:SAFETY TIPS Please read the guide book, the guide book that contains the installation, use and maintenance of important information. ◇Before using this product, please observe carefully the product is not unwrap or damage during transportation.As a result of damage during transporting , please do not use the lights, and contact with the dealer or manufacturer. -
Page 4: 2:Technical Parameters
hands. ◇Problems happens when operating performances, should immediately stop using the lights.Do not carry out maintenance, repair damage caused or likely to cause other problems.Please contact the company's maintenance repair. During the repair process, use the same type of accessories. ◇Please read the instructions carefully, especially regarding the installation, using, maintenance parts.Important that the lighting in the transport process, must be packed anti-shock protection carton or flight case. - Page 5 ◇Beam angle：2.5-35 degree. ◇Strobe：two-pieces plate strobe(0.5-9FPS) ◇16pcs super silence motors,pan&tilt 3-phase step motors,16bit. ◇Housing：high temperature resistant alloy plastic+Die casting handle When Remote control the bulbs, lamps automatically reduce the 60W power ◇IP rate：IP20 ◇Weight: 18.6KG ◇Size: 361* 300.8* 601.8mm Extended features:support disconnecting the power supply,the displ ay panel set up address code (had to pre-equipped with batteries).
-
Page 6: 3:Schematic Lighting Components
1: light head cover 2:top cover 3:arm cover 4:handle 5:Liquid crystal display screen 6:menu 7:up 8:down 9:return 4:PACKING AND SHIPPING 4.1 Packing CAB-330-MULTI is packaged by carton or standard 2-in-1 flightcase (selectable 1in1 or 4in1), Random accessories items shown below Name Quantity... - Page 7 Signal line piece Safety rope piece Clamp+bracket piece Power line piece 4.2Transport protection locks In order to transport it easy to protect the lamp body has two locks (XY axes each a lock), X-axis has four lock position, Y-axis triple lock, lock locked in the center position in the transport and light a vertical position with the arm member.
- Page 8 5.1 Installating rigging CAB-330-MULTI can be placed on the stage or on a stand in any direction . Quick lock system can quickly and easily remove or install a light hook. Note: must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only...
- Page 9 fully rotated 90 degrees clockwise to lock fastener. 5.2Fixed equipment 1. Before installing fixtures,must verified rigging equipments are not damaged,and can bear at least 10 times of light's weight. Check the building can be beared at least 10 times of total weights of light, fixture, and cable accessories. 2.Insert the locked hook fastener into base mounting holes horizontally, grab the handle clockwise 90 degrees fasteners, in the same way to install a second fastener,make sure the fastener is fastened under the light base.
- Page 10 Note: Lights be placed vertically upward,the shortest distance between working lights must be more than or equal 1000mm, lighting installation layout as following.
- Page 11 5.3 Data cable Data cable is DMX512 signal Note: Signal line connections is X-type connector。 X-type connector-----If the external flexible cable or cord of this light is damaged, please replace professional cable or cord from the manufacture or its agent.Lights' DMX input and output connects to a three-pin XLR and five-pin XLR insert, first pin is grounded,then negative signal is second pin, third pin connects to the positive polarity signal, fourth and fifth are empty.In order to prevent reception reflection...
- Page 12 If the signal transmission is long-distance , 512 signal amplifier must be added. DMX512 signal controller connect to the input of the amplifier first, then connect to the fixture from its output,couple with the terminal plug last. 1 Do not use two separate output connection, if connect the branch separating consecutive DMX512 signal amplifier must be used to separate.
- Page 13 7.1 lamp description CAB-330-MULTI is used with Yodn Single-ended lamp is short arc point light source, and its color temperature is 8000K and very stable, CRI ＞ 90.Life span is over2000 hours(according the using situation) 1.Attention 1. Do not install other similar lamps, and will cause safety hazards or equipment damage.
- Page 14 7.3Correction bulbs (lamp has been corrected before selling, if the individual case happens when changing the lamp, could following this way.) 1.The light is reseted by turning on the power,using the menu or console light bulb to play a bunch of white beam. 1.Please use cross screwdriver to open the back cover of lamp(use flathead screwdriver to adjust lamp fixed support,adjust A，when adjust A the light spot could be left or right to adjust （...
- Page 15 Spot gobo wheel 8.2color wheel Color wheel is made by 13 high standard fixed color, the user can easily select their own favorite color, to create a perfect lighting effect.Use the gobo wheel at same time is better.It can be easily transformed a colorful gobo effect. (According to customer needs may change at any time own custom various color wheel).
-
Page 16: 8:Display Setting(Menu Control)
8.3 Optical lens focusing The super mute voice motors and belt are used to work together to adjust optical lens to complete the pattern definition and achieve zoom enlarge system from 2.5 to 36 degree of gobo. 8.4 Prism wheel and the prism enlarge The prism wheel is equipped with a 8-facet prism and a T-facet prism can clockwise and counterclockwise rotation, speed adjustable, with colors and patterns, it can create a variety of colorful lighting effects. - Page 17 8.1Display panel 1.:DMX Address it can be done of address choice by touch screen,press 6 button to save the selectable address code. 2:Information item Fixture times power on times power on number lamp on times lamp on number 3:Set up (1).DMX presets 1.mode1 16CH 2.model 24CH (2).Display Intensity Display brightness 0-255 can optionally from dark to light...
- Page 18 4: Internal control (1) Reset Total system Reset pan/tilt reset color system reset gobo system reset strobe reset optics reset (2) manual control 5: Auto mode1/2/3 6: Calibrations Fine tune the initial data of motor of lamp internal(please be careful) Access Code choose code:003 press ENTER button to set tilt color wheel...
- Page 19 3:Tilt 0-255:tilt 270 degree 0-255：tilt fine 4:tilt fine 5:pan/tilt 0-255:pan & tilt speed speed adjustment 6:function 130-139 lamp on 140-149 pan & tilt reset 150-159 color wheel reset 160-169 gobo wheel reset 170-179 strobe reset 180-189 zoom/focus/prism reset 200~209complete reset 230-239 lamp off 7:color 0 white...
- Page 20 positionin 0-127 Prisms stack anticlockwis e rotating 128-255 Prisms stack clockwise rotating 10:static 0-3 white gobo 4-9 gobo 1 wheel 10-15 gobo 2 16-21 gobo 3 22-27 gobo 4 28-33 gobo 5 34-39 gobo 6 40-45 gobo 7 46-51 gobo 8 52-57 gobo 9 58-63 gobo 10 64-69 white 1...
- Page 21 17-19 spot gobo 5 20-22 spot gobo 6 23-25 spot gobo 7 26-28 spot gobo 8 29-31 spot gobo 9 32-34spot gobo auto rotating 35-37spot gobo auto rotating 38-40spot gobo auto rotating 41-43spot gobo auto rotating 44-46spot gobo auto rotating 47-49spot gobo auto...
- Page 22 202-227gobo clockwise from fast to slow 228-229static 230-255gobo anticlockwise from slow to fast 12:spot 1-127gobo rotating from fast gobo auto to slow rotating 128-255gobo rotating anticlockwise from slow to fast 13:rotatin 0-255 auto rotating fine gobo position 14:prism 0-19white 20-49 prism 1 static 50-75 prism 1 rotation 76-105 prism 2 static 106-127 prism 2 rotation...
- Page 23 M Magenta fine Y Yellow linear penetrate Y Yellow fine 8:Failure scoreboard and solutions Listed below is a common approach in the operation of a few common problems. ◇Fault A: The lamp is not working, the bulb is not lit, the fan does not work Solving 1: Check the power supply or the fuse is burned Solve 2: The main power connector on the voltage detector ◇Fault B: connect control units, lighting does not respond...
- Page 24 surrounding environment is particularly dirty, which can cause dust deposition lamps.Please use a glass cleaning solution and a soft cloth to wipe the focusing optical lens. Carefully Qi dry each part. At least 20 days to clean the dust outside a lens, the lens inside 30-60 days to clean up the dust once.