Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Elan PSD-67-IP-WIRELESS
Summary of Contents for Elan PSD-67-IP-WIRELESS
- Page 1 PSD-67-IP-WIRELESS (6IN1) USER’S MANUAL Thank you for purchasing our PSD-67-IP-WIRELESS (6in1) lighting. Please read these instructions carefully before you begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misuse.
-
Page 2: Safety Instructions
International standard DMX 512 signal is requested. 3. Outside size picture ................ 4 Packing list 4. Main function .................. 4 • PSD-67-IP-WIRELESS (6in1) light 5. DMX control function ..............5 • DMX signal cable 1 Set •... -
Page 3: Main Function
• Lens degree: 25º, 45º optional 3.Outside picture • Output mode: H(100%), M(75%), S(50%) • Dmx control channel optional 5. DMX Control Function DMX Channel (6CH) Channel Control Function Remarks value 0-255 R 0-100% 0-255 G 0-100% 0-255 B 0-100% 0-255 A 0-100% 0-255... - Page 4 DMX Channel (8CH) 46-48 R+UV 49-51 52-54 55-57 Channel DMX value Control Function Remarks 58-60 G+UV 0-255 General dimming 61-63 0-255 R 0-100% 64-66 0-255 G 0-100% 67-69 B+UV 0-255 B 0-100% 70-72 0-255 A 0-100% 73-75 A+UV 0-255 W 0-100% 76-78 W+UV 0-255...
- Page 5 6. Display Operation 175-177 G+B+W+UV 178-180 G+A+W+UV 181-183 B+A+W+UV 184-186 R+G+B+A+W 187-189 R+G+B+A+UV 190-192 R+G+B+W+UV Charging indicator 193-195 R+G+A+W+UV 196-198 R+B+A+W+UV 199-201 G+B+A+W+UV 202-204 R+G+B+A+W+UV Wireless ID indicator Auto run (bigger 205-255 value faster speed) 0-15 invalid Color changing, 10CH 16-255 bigger value, faster speed...
- Page 6 Exp: Select DMX Channels optional mode, the operation is as below: FAdE –> FA00-FA15 –> Gradual changing mode • Press MENU, go back to the initial setting • Press UP/DOWN, display ”CHnd” • Press ENTER to change the content, the display will glinting at this moment FLAS –>...
- Page 7 8. Charging and power instruction 10. XLR cable connecting XLR cable: The standard way of connecting the XLR is: one end connects to the male plug, and the other end Charging indicator connects to the female. As bellow: pin 1: ground, pin 2: negative signal, pin 3: positive signal When charging, CHARGE display red.
-
Page 8: Technical Specifications
11. Cable connecting Draft • When connect to the electricity, did the led flash one time? If so, the power source is normal; If not, please check if the switch and the transformer has power out • Check if the power input of the IC board is normal Display not bright •...
Need help?
Do you have a question about the PSD-67-IP-WIRELESS and is the answer not in the manual?
Questions and answers