Table of Contents
Advertisement
Quick Links
CABLED-60-BEAM-Z-
FPTR
USER'S MANUAL
Thank you for purchasing the CABLED-60-BEAM-Z-FPTR. Every suit has been
thoroughly tested and shipped in perfect condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure all
accessories necessary to operate the unit has arrived intactly. In the case damage
has been found or parts are missing, please contact Acson Comercial or your
local supplier for further instructions. Do not return this unit without any warning.
Advertisement
Table of Contents
Related Manuals for Elan CABLED-60-BEAM-Z-FPTR
Summary of Contents for Elan CABLED-60-BEAM-Z-FPTR
- Page 1 CABLED-60-BEAM-Z- FPTR USER’S MANUAL Thank you for purchasing the CABLED-60-BEAM-Z-FPTR. Every suit has been thoroughly tested and shipped in perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intactly.
-
Page 2: Table Of Contents
Contents 1. Dimensions ..........................3 2. Before Using ........................... 3 What’s inside Unpacking AC Power Supply Safety Instruction 3. Introduction ..........................4 Specifications Product features Product Diagram 4. Installation..........................5 Power supply connection DMX Signal Connection 5. Operating Instructions ......................7 Control board function Menu Instructions 6. DMX Channel Table ......................... 9 FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING. -
Page 3: Dimensions
1. Dimensions All dimensions are in millimeters 2. Before Using What’s inside • Equipment x 1 • User manual x 1 • Power cable with Plug x 1 • Iron holder x 1 Unpacking Please open the equipment carefully ,and check all the spare parts are included or not.If any part of the cause of the failure due to improper transportation or carton,please keep the packing materials and imme- diately inform the shipper to check.If the equipment must be returned to the factory,the equipment should be use the original carton and packaging. -
Page 4: Safety Instruction
Safety Instruction • This product is I level protection equipment,so it is must be connected well and connected by the pro- fessional people. • Make sure the voltage don’t be above or below which the user manual rated values. • Confirm the power cord is not a sword cut or damaged. -
Page 5: Product Diagram
Product Diagram 4. Installation • This equipment can be used in many places, it • Please ask the professionals to install the equip- can hang and put on the ground ment,any improper installation will cause perso- nal injury or material damage. •... -
Page 6: Power Supply Connection
Power supply connection The equipment can be used in the wide voltage input. Please make sure the voltage is the scale of rated voltage when connecting the power. The equipment can adapt to 100V to 240 V AC voltage and 50-60 Hz. Connection Brown AC Live... -
Page 7: Operating Instructions
5. Operating Instructions Control board function Button Function MENU Choose Menu or function exit ENTER Current show menu or enter into the current selected function Increase the value DOWN Decrease the value Menu Instructions [DMX address setting] • Press MENU when it shows [Address] then press ENTER •... - Page 8 [DMX Mode selection] [operate UP or DOWN] press [ON/OFF] to choose [ON], the screens can rotate 180°. When selecting [Key lock] press ENTER. Operate UP or DOWN. Press [ON/OFF] to choose [ON],when the backlight closed,the button key is locked,the operation is invalid Press MENU until it shows [Users mode], •...
-
Page 9: Dmx Channel Table
6. DMX Channel Table DMX channel functions and their values (35 DMX CHANNELS) Mode/Channel Value Function PAN Movement 8bit 0-255 Pan Movement Pan Fine 16bit 0-255 Fine control of Pan Movement TILT Movement 8bit 0-255 Tilt Movement Tilt Fine 16bit 0-255 Fine control of Tilt Movement Speed Pan/Tilt movement... - Page 10 Dimmer 0-255 Intensity 0 to 100% No function 8-39 From RED to YELLOW 40-71 from YELLOW to GREEN 72-103 from GREEN to CYAN 104-135 from CYAN to BLUE 136-167 from BLUE to MAGENTA 168-199 from MAGENTA to RED 200-231 from RED to WHITE 232-255 Cross fading colours from slow to fast ColorPresets...
- Page 11 Red LED2 0-255 Red(0-Black, 255-100% Red) Green LED2 0-255 Green (0-Black, 255-100% Green) Blue LED2 0-255 Blue (0-Black, 255-100% Blue) Red LED3 0-255 Red(0-Black, 255-100% Red) Green LED3 0-255 Green (0-Black, 255-100% Green) Blue LED3 0-255 Blue (0-Black, 255-100% Blue) Red LED4 0-255 Red(0-Black, 255-100% Red)
- Page 12 IMPORTANT INFORMATION! In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the impact on human health and the environment, please make sure that this product is recycled at the end of its life. Note: All information is subject to change without prior notice.