Webslides Setup - Planet Networking & Communication WIPG-300H User Manual

802.11n wireless interactive presentation gateway

Hide thumbs Also See for WIPG-300H:

Table of Contents

Step 5. After a few minutes, a complete message will show on the screen.

Step 6. Power off the WIPG-300H and then power on it again.

Step 7. Login the web UI, and click Reset to Default to take effect.

New firmware versions posted at the website of PLANET Technology can be downloaded for

free. There is no need to upgrade the firmware unless the new firmware has a new feature you

want to use.

When you upgrade its firmware, you may lose its current configurations. Do not turn off the

WIPG-300H while the firmware is being upgraded; otherwise, the WIPG-300H may be damaged.

5.4.8. Webslides Setup

Click on "WebSlides Setup" option and you can: "Adjust Auto Refresh Interval", or activate "Access

Password Control" Please pay attention to the note for information.

PLANET 802.11n Wireless Interactive Presentation Gateway

WIPG-300H

Table of Contents