Appendix B: Faq - Planet Networking & Communication WIPG-300H User Manual

802.11n wireless interactive presentation gateway

Hide thumbs Also See for WIPG-300H:

Table of Contents

FAQ1 : How to reset the WIPG-300H to factory default

[ANSWERS]

1) Power off the WIPG-300H.

2) Press and hold the button with paper clip, and then plug in the DC jack of the AC adapter to power on

WIPG-300H. After 10~15 seconds, you can release the button.

Reset Button

3) Now, you should be able to login the WIPG-300H by default setting. (Default username and password are

both "admin".)

FAQ 2: How to use WIPG-300H to output the screen to the projector or LCD via HDMI cabling

[ANSWERS]

You can switch the output interface through the web UI. The default setting is VGA.

However, if you want to use HDMI interface directly without switching:

(1) Plug the HDMI connector and turn on the projector or LCD first.

(2) Then just power on the WIPG-300H to achieve it.

PLANET 802.11n Wireless Interactive Presentation Gateway

Screw hole

(Optional Kit for Wall Mount)

WIPG-300H

Appendix B: FAQ

Table of Contents