Table of Contents
Advertisement
In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First make
sure your Ethernet Adapter is working, refer to the adapter's manual if needed.
1.
Install TCP/IP component
1)
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2)
Click the Network and Internet Connections icon, and then click on the Network Connections
tab in the appearing window.
3)
Right-click the icon shown below and select Properties on the prompt page.
4)
On the prompt page shown below, double-click on the Internet Protocol (TCP/IP).
PLANET 802.11n Wireless Interactive Presentation Gateway
Appendix A: Configuring the PCs
Figure A-1
64
WIPG-300H
Advertisement
Table of Contents
