Ribbon Saver; Print Ribbon Storage Guidelines - DataCard CE870 Installation And Administrator's Manual

Monochrome-Topcoat, Black-Topcoat

Silver-Topcoat, Black-Topcoat, up to 500 images per

roll
Gold-Topcoat, Black-Topcoat, up to 500 images per roll

These ribbons print the front side of the card using the
monochrome color panel and the back side using the
black (K) panel. Topcoat can be applied on one or both sides.
Additional colors of monochrome ribbon, such as red or silver, are available by request.

Ribbon Saver

A roll of Datacard-certified monochrome ribbon enables the Ribbon Saver feature in the printer.
Ribbon Saver can increase the number of cards printed with each roll of ribbon because only the
printed portion of the ribbon is used. Excess ribbon is not advanced, reducing waste.

Print Ribbon Storage Guidelines

Store print ribbon in the original package until you load it in the printer.

Keep the original packaging closed.

The print ribbon maintains its quality for about one year. For optimum card quality, purchase

and store quantities that can be used within one year.
The print ribbon and card stock might require secure storage and tracking. Follow your

organization's policy for storing and tracking supplies.
Choose a location away from direct sunlight, with a temperature between 32°F and 77°F (0°C

and 25°C). A humidity range from 40% to 60% non-condensing is recommended.
Keep supply rolls at room temperature when installed in the printer. If supplies are stored in

an environment that is cooler than the printer environment, allow them to reach room
temperature before using.
If the printer will not be used for an extended period, remove supplies from the printer and

store them with new supplies.
110
ST-KT Ribbon
GT-KT Ribbon
Supplies and Parts