Extech Instruments MG310 User Manual page 2

Insulation resistance tester with continuity and ac voltage modes
Table of Contents

Advertisement

Introduction 
Thank you for selecting the MG310 Insulation Resistance Tester. This meter measures insulation 
resistance, continuity, and AC Voltage. The MG310 is CAT III 600V AC and ideal for measuring 
insulating materials and electrical equipment such as transformers, cables, switches, and 
appliances. Applications include maintenance, testing, and inspection. Proper use and care of this 
meter will provide many years of reliable service. 
 
Safety 
This tester is designed and manufactured in compliance with the IEC61010 standard. This user 
manual includes detailed information related to the safe operation and care of this instrument. 
Please read carefully before using the instrument. 
Please read and understand this user manual before using the device. 
Always use the device as specified in the user manual, retain the manual for future use and 
check the www.extech.com website for newer versions of the user manual. 
Misuse of this device may cause personal injury and damage to the instrument and 
connected equipment. 
This symbol on the instrument indicates that for safe operation the user must use the 
instrument as described in the user manual. 
Danger icons: Alert to conditions and actions that may cause serious or fatal injury. 
Warning icons: Alert the user to the potential of electric shock. 
Caution icons: Alert to conditions and actions that may cause damage to the instrument or 
that may affect the instrument accuracy. 
 
Danger
Do not measure circuits with voltages greater than 750V AC. 
Do not use this instrument in areas where flammable conditions exist. 
Do not use this instrument in areas of high humidity. Do not operate this instrument with 
wet hands. 
Do not touch conductive sections of the test leads when taking measurements. 
When test leads are shorted and connected to the instruments do not press the TEST button. 
Do not open the battery cover during tests. 
Do not touch the tested circuits or wires during insulation measurements. 
 
 
 
 
 
 
2
MG310-en-GB_V1.0 12/15

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MG310 and is the answer not in the manual?

Table of Contents