Adastra RM1202 User Manual page 7

Pressing the Previous track button () briefly steps backwards through tracks on the memory device. Press
and hold this button to decrease the playback volume.
Pressing the Next track button () briefly steps forwards through tracks on the memory device.
Press and hold this button to increase the playback volume.
To pause the current track, press the Play/Pause button () and press again to resume playback.
The LCD display will show the selected track number and then the elapsed time during playback.
FM Tuner
The FM tuner function operates in the same way as a standard FM radio and benefits from the connection of
an FM antenna to the rear panel 'F' type connector (37).
If no channels are tuned in, press the Play/Pause button () to begin auto tuning, which scans available
stations and stores them as channels within the FM tuner.
Pressing Play/Pause again will abort the auto-tuning.
To step through pre-set stations, press the Previous or Next (, ) buttons.
Holding the Previous track or Next track buttons will adjust the output volume of the player.
Bluetooth
The Bluetooth function allows connection of a smart phone or tablet to the media player section for playback
of stored files or streamed digital audio.
In order to enable this function, it will be necessary to pair the sending device to the receiver as follows.
1. Open the Bluetooth settings menu on the smart phone or tablet (or other sending device)
2. Scan for Bluetooth devices and look for "adastra 0000" in the list of available devices
(ensure that the RM amp is powered on and within reception range)
3. Select "adastra 0000" and the sending device should confirm that it is connected as an audio device.
(note that "0000" may be a different number if it has been edited – see below)
4. Play audio from the sending device, ensuring that volume controls are not turned down/muted
5. Turn up the LINE 5/USB volume control on the amplifier to the required level.
The Previous, Next and Play/pause buttons will operate in Bluetooth as remote playback controls. Holding the
Previous track or Next track buttons will adjust the output volume of the player.
The Bluetooth name can be customized to enable identification of individual nearby amplifiers.
To customize the Bluetooth number press and hold the Play/Pause button until adastra 0000 is displayed with
one of the characters flashing.
Press Previous or Next buttons to edit the number and Play/Pause to select another character.
Hold Play/Pause to store the ID and exit.
Note: Android devices have the facility to re-name devices within the Bluetooth settings menu.
If the Bluetooth ID has been re-named on the Android device, editing the Bluetooth ID on the media player
will not affect the name displayed on that Android device.
Track navigation can be controlled from the paired device or from the front panel of the RM1202.
Previous, Next and Play/pause buttons (, , ) will operate in Bluetooth as remote playback controls.
Holding down the Previous or Next buttons will also adjust the volume of the player.
953.163UK User Manual