Troubleshooting Checks
Trouble
No Power
Remote locks up or doesnÕt work at all
CD changer will not turn on with remote
CD changer is always turned on with
audio/video receiver
Remote wonÕt control the audio/video
receiver, laserdisc player, CD Changer,
VCR, or satellite receiver
Here's What to Try
¥
Make sure all components are plugged in as instructed in
the Installation & Hookup Guide.
¥
Check circuit breaker for the wall outlet.
¥
If a disconnect switch was added to the system, but sure it is
in the ON position.
¥
Remove batteries for 2 minutes then reinstall the batteries
and try remote again.
¥
Maybe batteries were installed incorrectly. Remove batteries
and reinstall correctly.
¥
Make sure POWER switch on the front of CD changer is on.
¥
Make sure CD changerÕs power cord is plugged into the
back of the audio/video receiver.
¥
Make sure audio/video receiver is turned on.
¥
This is how the system operates since the CD changer is
plugged into the back of the audio/video receiver.
¥
Remove batteries for 2 minutes then reinstall the batteries
and try remote again.
¥
Maybe batteries are weak. Try new batteries.
31