Component Buttons - RCA 253 Series User Manual

Using Your System Remote Control
Universal Remote Control
Your RCA Universal Remote Control is capable of operating most
RCA audio and video equipment. To use the remote control
effectively, always aim it directly at your receiver.
The remote control operates on four batteries, included with your
system. Install them before attempting to operate the remote. Be sure
-
+
to match the and ends of each battery to the symbols shown in the
remoteÕs battery compartment.

Component Buttons

Press one of these buttons to turn on all of the system components
needed to operate that component. This also puts the remote in the
mode to operate that component.
AM•FM (Audio/Video Receiver) Turns on receiver and sets remote
to control the receiver.
CD Turns on CD Changer and A/V Receiver and sets the remote to
control the CD Changer.
DSS•CABLE Turns on the RCA Digital Satellite receiver, A/V
receiver, and TV and sets the remote to control the DSS
Digital Satellite system is not used, this button can be used with the
POWER button to turn on and operate a compatible cable box.
TV Turns on TV and A/V Receiver and sets the remote to control
the TV.
VCR1 Turns on VCR, TV, and A/V Receiver and sets the remote to
control the VCR.
VCR2•LD Turns on laserdisc player, TV, and A/V Receiver and sets
the remote to control the laserdisc player.
These component buttons do not operate any of the basic components
in this system.
AUX (Auxiliary) Can be coded to operate any component.
TAPE Turns on a compatible cassette tape player and sets the remote
to control the tape player.
GUIDE
MUTE
¨
System. If a
DISPLAY
PROGRAM
BY-PASSSWAP
¥
VCR 2 LD CD
¥
AM FM TAPE AUX
REW PLAY FF
REC STOP PAUSE
¥ SKIP
RDM
PREV CH
1 2 3
4 5 6
7 8 9
¥
INPUT SEEK ANTENNA
0
¥
CLEAR RESET REP DELAY
CH CTRL
MENU TV MENU
MOVE
+
PIP SWAP PIP
—
CTR MODE
¥
LEVEL
AUDIO
¥
DISC
7