Chapter 4
Maintaining and Troubleshooting the ISDN System
Checking MGW Provisioning
This section describes how to check provisioning on IOS and IUA/SCTP gateways.
IOS Gateway
The following example shows how a Cisco IOS gateway is provisioned for ISDN backhauling using
RUDP.
Note
Current configuration:
!
================
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime localtime
no service password-encryption
!
hostname c2421.200
!
enable password xxxxxxx
!
clock timezone CDT -6
network-clock base-rate 56k
network-clock-select 3 T1 0
network-clock-select 1 T1 1
network-clock-select 2 system (SCB)
ip subnet-zero
!
!
ip domain-name ipclab.cisco.com
ip name-server 10.89.224.1
!
ip audit notify log
ip audit po max-events 100
backhaul-session-manager
set isdn1 client ft
group group1 set isdn1
group group2 set isdn1
session group group1 10.89.225.223 9000 10.89.227.200 9000 1
session group group1 10.89.226.223 9001 10.89.227.200 9001 2
session group group2 10.89.225.224 9000 10.89.227.200 9000 1
session group group2 10.89.226.224 9001 10.89.227.200 9001 2
isdn switch-type primary-ni
isdn voice-call-failure 0
!
!
!
!
!
!
!
no voice confirmation-tone
voice-card 0
!
OL-12436-02
The typical problem areas are in bold type. Look at the problem area after the Call Agent is
provisioned.
Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting
Checking MGW Provisioning
4-11