User Side Pri - Cisco BTS 10200 Troubleshooting Manual

User Side PRI

User Side PRI
The User Side PRI feature allows provisioning when the Cisco BTS 10200 Softswitch does not support
the SS7 variant of a particular country. This feature provides support for the ISDN PRI User Side basic
call-control procedures as described in Q.931 ISDN Call Control Procedures. The user-side stack has the
following PRI variants enabled:
•
•
•
•
•
Figure 1-4
Figure 1-4
Cisco BTS 10200 Provisioning
This section provides an overview of the Cisco BTS 10200 Softswitch provisioning steps. The basic
Cisco BTS 10200 provisioning sequence is shown below.
These steps provision ISDN-specific data in the Cisco BTS 10200 Softswitch database. Referenced data
Note
tables, such as Dial Plan and Subscriber Profile must already be provisioned. Additional commands are
also necessary to provision routing and translation for ISDN channels (see the Cisco BTS 10200
Softswitch Command Line Interface Reference Guide).
Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting
1-4
ISDN US NI2 PRI (TR 1268)
ISDN Q931 PRI
ISDN DMS
ISDN ATT 4ESS PRI
ISDN ATT 5ESS PRI
shows a sample PRI user-side configuration.
PRI User-Side Configuration
PRI Network Side
PSTN
Signaling
User Side
Cisco BTS 10200
IP Network
(VoIP)
Gateway
Chapter 1 ISDN Provisioning
SIP Phones
OL-12436-02