Oven Racks; The Oven Light - Roper F8858W0 Use And Care Manual

COLLAR
REPLACING THE OVEN LIGHT
Do not touch oven bulb when hot, with wet hands, or wi e
oven light area with wet cloth. Unplug or disconnect t 6 e
electrical supply to range before removing.
Never touch the electrlcally live collar on the bulb when
replacing it.
Electrical
P
ower must be shut off if you have to replace a
broken bu b.
1
Remove the three screws and lift off the glass retainer,
glass cover and gasket.
2 Replace the bulb .vith a 40 watt appliance bulb. An ap-
pliance bulb IS smaller than a standard 40 watt
household bulb and IS made to withstand high oven
temperalures and have a much longer bulb life
3 Replace the gasket, glass cover and glass retainer.
Tighten screws ser,urely
21
REMOVABLE OVEN RACKS
'To ln5talI-
' S:?t the
ratsed back edge
elf 'he rack between a patr 01'
g IJ I d e s
',
L
Pdsh the rack
in until you rezch the bump in the rack
gulae. theil iift the front of the
rack up a bit and push the
racq all the way In
!;ee tt (3 zleanlng insrructlons on page 17
To
Remove
1 Pull the oven rack out. then up