Roper F8858W0 Use And Care Manual page 17

3 For yo
J. safety.
when tht ocbiflg lemperature 1s
redch-
ed. +tlt: oven door cannc be ope,!ed (the word LOCK
wtll bl: on IC the display)
4
Wher t e ?',:a ho!Jr clean y\.~ei IS "ver the over1 begins
to coo
- 5. Wher; :he temperature has fallen Delow locking
tempe-ature, about 20 - 3C minutes after the oven goes
. off at the end of the clean I ycle. the door can be opened
(the word LOCK will be off In the display)
TO !SET A CLEAN CYCLE
The serf~~zlean cycle IS preprogrammed for 3% hours You
can also set the electronic range control for a delayed start
of the clean cycle
To self-clean:
1 Slide the door lock handle to the right. You may need to
press the door slightly to get it to lock properly
Never try to force the door lock handle. Forcing the
handle may damage the door locking mechanism
16
I,
'
push CLEAN button The oven lmmedlateiy begins IO
rled!
riote You can find out when the clean cycle will be flnlsh-
ed by pushing the STOP TIME button
To use delayed seif-clean:
1 Pusn STOP TIME button.
2 Turn SE1 knob to time of day when you wish cleaning
to De completed (must be more than 3'/2 hours later
!han current time of day).
3 Slide the aoor lock handle to the right You may need to
press the door slightly to get it to lock properly. Never
try to force the door lock handle. Forcing the handle
may damage the door locking mechanism.
4 Push CLEAN button.
Note. During a delayed self-clean cycle, you can find out
when oven will turn on by pushing and holding the CLEAN
button
WHEN CLEAN CYCLE IS FINISHED
1. Watt until the oven has cooled below locking
temperature and the word LOCK IS off in the display
(20-30 mtnutes).
2. Slide the door lock handle left to unlock the door. You
will not be able to unlock the oven unless the oven
temperature is at a safe level. Never force the door lock
handle
Note:
If the door does not
unlock
because the temper-
ature has not had time to drop to a safe level when you
first try to open the door, be sure to slide the handle back
all the way to the right.
Note:To stop a clean cycle at any time, press the
OVEN/CANCEL button and follow instructions from WHEN
CLEAN CYCLE IS FINISHED.