Table of Contents
Advertisement
ENGLISH
A
B
C
D
E
NOTE: Press all the dual function buttons momentarily to activate the
Upper Row Function, and press these buttons for more than 1 second
to activate the Lower Row Functions.
A.
Thermocouple Inputs.
• T1 = Thermocouple Input 1, T2 = Thermocouple Input 2
• Use thermocouples types K, J, T, or E ONLY in the input ports
B.
Backlit LCD Display
• See DISPLAY section of this manual.
C.
Power (
• Press and Hold for more than 1 second to turn the thermometer
on and off.
• Press to turn the backlight on and off. The backlight turns off after
30 seconds without any button pressed.
• If the battery is low, the backlight is disabled.
D.
Max/Min (
• Press to step through the maximum, minimum, and average
readings in the secondary display. When viewing logged readings,
the maximum, minimum, and average measurements are
displayed.
• Press and Hold for more than 1 second to turn off this display.
• The "
"SETUP" modes only.
E.
Recall Set Up (Exit)
• Press to recall or stop viewing logged and MIN/MAX readings.
• Press and Hold for more than 1 second to start or exit "SETUP".
• The "EXIT" function is activated in the "RECALL" and
"SETUP" mode only.
4
FEATURE DETAIL
)
)
" scroll function is activated in the "RECALL" and
ONLY
ONLY in the input ports
F
G
H
I
Advertisement
Table of Contents
