Battery Replacement - Klein Tools DTL302 Instruction Manual

2 temperature inputs, ip67 water/dustproof rating, multi parameter backlit display, convenient probe storage, min/max & data hold, external usb power for long-term logging, usb logging software, differential t1-t2, magnetic mount strap

Hide thumbs

Table Of Contents

Table of Contents

Always use a fresh replacement battery of the speciﬁ ed size and type.

Immediately remove the old or weak battery from the meter and dispose

of it in accordance with your local disposal regulations. Old or defective

batteries can leak chemicals that corrode electronic circuits.

WARNING!

To avoid electric shock, be sure to turn off the meter's power and

disconnect thermocouples from any equipment before you remove or

install batteries. Under NO circumstance should you expose batteries to

extreme heat or fire as they may explode and cause injury. To install a

new battery, follow these procedures:

• Remove the screws from the battery compartment cover on

the back of the meter and lift the cover (Fig 1).

• Remove and discard the old batteries. Always dispose of old

• batteries promptly in a manner consistent with local disposal

regulations.

• Place a fresh batteries in the compartment.

• NOTE: If you do not plan to use the meter for a month or

more, remove the battery and store it in an area that won't be

damaged by a leaking battery.

• Reattach the battery compartment cover to the meter and

reinstall the screws.

Turn instrument off and disconnect any cables. Clean the instrument by

using a damp cloth. Do not use abrasive cleaners or solvents.

Remove the batteries when instrument is not in use for a prolonged

period of time. Do not expose to high temperatures or humidity. After a

period of storage in extreme conditions exceeding the limits mentioned

in the Speciﬁ cations section, allow the instrument to return to normal

operating conditions before using it.

Caution:

accessories shall be subject to a separate collection and

correct disposal.