Table of Contents
Advertisement
CONVERTING A SAVED 489 SETPOINT FILE
Note
Notehe one that is added in
4
2.2
Converting a Saved 489 Setpoint File
The EnerVista 8 Series Setup software allows the user to create new setpoint files based on
existing SR 489 setpoint files. These can be uploaded to a relay at a later date. The
following procedure illustrates how to convert existing 489 setpoint files.
Only 489 setpoint files from EnerVista 489 Setup version 4.0 are supported for conversion.
1.
Install and start the latest version of the EnerVista 8 Series Setup software (available
from the GE EnerVista CD or Website). (See the 889 Instruction Manual for more
information.)
2.
In the Offline pane, right click and select the New Settings File item. The following box
appears, allowing for the configuration of the setpoint file for the correct firmware
version and relay order code.
It is important to define the correct firmware version and order code to ensure that
only available setpoints are downloaded into the relay.
3.
Select the firmware Version, and Ordercode Options for the new setpoint file.
4.
For future reference, enter some useful information in the Description box to facilitate
the identification of the device and the purpose of the file.
5.
To select a file name and path for the new file, click the button beside the File Name
box.
6.
Select the file name and path to store the file, or select any displayed file name to
replace an existing file. All 889 setpoint files should have the extension '.cid' (for
example, '889 1.cid').
File names for setting files cannot have a decimal point other than the one that is added in
front of CID.
7.
Click the box beside Initialize Settings from SR Settings File.
CHAPTER 2: CONVERTING SETTINGS FILES
MULTILIN 489 TO 889 RETROFIT KIT – INSTRUCTION MANUAL
Hide quick links:
Advertisement
Table of Contents
