Table of Contents
Advertisement
GE
Grid Solutions
Note
MULTILIN 489 TO 889 RETROFIT KIT – INSTRUCTION MANUAL
Multilin 489 to 889 Retrofit Kit
Chapter 2: Converting Settings
Converting Settings Files
Before any mechanical or electrical changes are made, the settings file from the Multilin
489 relay must be backed up. The existing settings file can then be converted to an
8 Series settings file. All converted settings and new settings (set to default values) must be
carefully reviewed before the file is uploaded to the new 889 relay.
2.1
Downloading & Saving a 489 Setpoint File
In the EnerVista 489 Setup window, setpoint files are accessed in the Settings List control
bar window or the Files Window. Use the following procedure to download and save
setpoint files to a local PC.
1.
Start version 4.0 of the EnerVista 489 Setup software.
Only 489 setpoint files from EnerVista 489 Setup version 4.0 are supported for
conversion. Older file versions must be converted to version 4.0 using the latest
EnerVista 489 setup software.
To download the latest 489 setup software, see
2.
Ensure that the site and corresponding device(s) have been properly defined and
configured. (Refer to the 489 Instruction Manual for more information on the Enervista
489 Setup software.)
3.
Select the desired device from the site list.
4.
Select File > Read Device Settings from the online menu item, or right-click on the
device and select Read Device Settings to obtain settings information from the
device.
5.
After a few seconds of data retrieval, the software requests the name and destination
path of the setpoint file. The corresponding file extension is automatically assigned.
Press Receive to complete the process. A new entry is added to the tree, in the File
pane, showing path and file name for the setpoint file.
6.
Note the location of the 489 setpoint file.
Files
http://www.gegridsolutions.com
3
Hide quick links:
Advertisement
Table of Contents
