First Installation; Manual Rinsing Cycle - Gaggia VELASCA PRESTIGE User Manual

First installation

Manual rinsing cycle

4219_460_3729_1_booklet_A5_v1.indd 9
1 Slide the drip tray with drip tray cover into the machine.
2 Remove the water tank.
3 Fill the water tank to the MAX level with fresh water.
4 Fill the coffee bean hopper with coffee beans.
5 Insert the small plug into the socket located on the back of the
machine. Insert the power plug into the electrical outlet.
Note: The display reminds you have to insert the hot water
dispensing spout. If not present, press on both sides of the hot
water dispensing spout and insert it into the machine until you
hear a click.
6 Place a container under the hot water and coffee dispensing
spouts.
7 Press the STANDBY button.
8 Press the OK button to start the automatic circuit priming cycle.
- The machine performs an automatic rinsing cycle.
9 Remove the water tank from the machine, empty it.
10 Fill the water tank with fresh water and place it back into the
machine.
11 Continue with the next step: the manual rinsing cycle.
1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button to select pre-ground
coffee. Do not add pre-ground coffee.
3 Press the ESPRESSO LUNGO button. The machine starts
dispensing water.
4 When the machine stops dispensing, empty the container.
Repeat steps 1-3 twice.
5 Press the SPECIAL DRINKS button. Place a container under the
hot water dispensing spout.
6 Press the UP/DOWN buttons to scroll through the options of
the display. Press the OK button to select 'hot water'.
-
The display reminds you have to install the hot water
dispensing spout (if not present), press the OK button to
confirm.
7 Press the OK button to start hot water dispensing.
-
Dispense water until the display shows the no water icon.
8 Fill the water tank with fresh water up to the MAX level and
remove the container.
The machine is ready for use.
English
9
14/02/17 08:58