Sequence Log Entries - Agilent Technologies 7697A Troubleshooting Manual

3
Log Entries and Errors

Sequence Log Entries

Table 1 Sequence Log entries and descriptions
Message
Start Sequence
Stop Sequence
Pause Sequence
Resume Sequence
Active Method Change
Instrument ready
Instrument not ready
Setpoint changed
Chiller temp out of range, 0C
Vial # skipped
Vial # continue
Vial # not found
Vial # wrong vial size
Vial # barcode read error
Vial # barcode mismatch
Vial # barcode chksum error
Vial # external not ready
Vial # external timed out
Start of vial equib time
26
The sequence log contains entries related to the running or
completed sequence. The log contains up to 256 records. If
at capacity, any new entries overwrite the oldest ones.
Many entries simply log routine sequence events, such as
starting and stopping. Others indicate potential problems.
See Table 1.
See also "Vial Handling"
Description
The active method in the HS changed. This happens frequently during a sequence.
(It does not indicate changes to saved methods.)
A method setpoint was changed during the sequence.
The chiller temperature went out of the expected temperature range.
The indicated vial was skipped. Look for other messages.
The indicated vial was processed with some issue, in accordance with the method's
sequence actions. Look for other messages.
The indicated vial was missing.
The method specified a different vial size than the one detected.
The barcode for vial # was not decoded.
The barcode for vial # was decoded but the decoded string did not match the
expected string.
The barcode for vial # was decoded but the checksum character did not match the
checksum calculated for the decoded string.
When vial # was ready for injection, an external device was not ready.
Vial # exceeded the method's time limit while waiting for an external device to
become ready.
and "Pressures and
Agilent 7697A Troubleshooting
Flows".