Fluke 902 FC User Manual page 10

902 FC
Users Manual
•
When batteries are changed, ensure that the
calibration seal in the battery compartment is not
damaged. If damaged, the Product may not be safe to
use. Return the Product to Fluke for replacement of
the seal.
•
Do not use in CAT III or CAT IV environments without
the protective cap installed. The protective cap
decreases the exposed probe metal to <4 mm. This
decreases the possibility of arc flash from short
circuits.
•
Have an approved technician repair the Product.
•
Repair the Product before use if the battery leaks.
•
Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures
above 50 °C. If the batteries are not removed, battery
leakage can damage the Product.
To avoid possible damage to the Product or to equipment
under test:
•
Use the proper jacks, function, and range for the
measurement application.
•
Clean the case and accessories with a damp cloth and
mild detergent only. Do not use abrasives or solvents.
6
WCaution