Testing Without Using The Test Application - Casio V-R7000 Service Manual

3-4. Testing without Using the Test Application

LAN Port
Tap "Settings"  set "Ethernet" to ON.
1
Tap "eth0", and check and record the network information of the terminal.
Connect the LAN port and that of the access point with the LAN cable.
2
Tap "Settings"  set "Ethernet" to ON.
Tap "eth0"  "IP settings"  "DHCP"  "Apply".
3
Check that acquiring of an IP address starts and "Connected" appears.
Return the network information to the settings recorded in Step 1.
4
USB Port 3, USB Port 4
Connect a mouse to the USB Port 3 and then
USB Port 4.
USB Port 4
1
Be sure that the pointer of the mouse appears
on the screen and moves properly.
LAN Port
USB Port 3
– 12 –
V-R7000/V-R7100