Table of Contents
Advertisement
11. Click Browse and browse to this location:
x:\abpcid.inf
where x:\ is the drive where the installation files are stored.
12. Click Open.
13. Click OK.
14. Follow the on-screen instructions for installing the Driver.
When you close the Properties screen, you may be prompted
TIP
to restart your computer. If you get this prompt, restart your
computer before using this updated Driver.
15. Go to the next section, Install 1784-PCID Driver Software, on page 3-9.
To ensure that the card works properly, you must install Driver
IMPORTANT
Software as described on page 3-9.
Install 1784-PCID Driver Software
We recommend that you exit all Windows programs before
IMPORTANT
running this Setup program.
1. Insert the floppy disk in the computer's floppy disk drive, or access the
compressed file you downloaded and saved to a temporary directory.
2. Select Start ⇒Run.
3. At the Run pop-up window, type x:\setup where x is the drive where the
installation files are stored.
4. Click OK and follow the on-screen instructions to install the 1784-PCID
Driver Software.
5. Click Next.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Install the Driver in Windows 2000
Publication 1784-IN004D-EN-P - August 2002
3-9
Advertisement
Table of Contents
