Adjustment; Legrest; Tilt Function; Accessories - Etac Swift Mobile 160 Manual

Adjustment

Height
G1-G7. The height is easily adjusted by inserting the bolt in
the required position. See distances in table
Tilt angle
G9. Fit the gas piston in position A to tilt the seat at angles from -5° to 30°
G10. Fit the gas piston in position B to tilt the seat at angles from 0° to 35°
User brake
G11. When adjusting the brake, the brake pin should be set 18 to 22 mm from the rear wheel for good grip.

Legrest

H1. The assistant can easily raise and swivel the legrests to
the side for the user to sit down in or get up out of the
chair. The footrests are detachable.

Tilt function

I1. The assistant can adjust the sitting angle with ease by holding in the handle and tilting to the required position.
Make sure that the wheels are locked if the tilt function is used when the user is sitting in the chair.

Accessories

User brake
G11 When adjusting the brake, the brake pin should be set 18 to 22 mm from the rear wheel for good grip.
See Figure J
J1.
Leg and calf rest, angle-variable
J2.
Footrest
J3.
Commode pan
J4.
Pan-holder attachments
J5.
Attachments for low pan-holder mounting
J6.
Commode pan holders
J7.
Bucket holders
J8.
Splash guard
J9.
Comfort seat
J10. Seat cover
J11. Anti-tip stabilisers including bracket
J12. Rear wheel kit
J13. Anti-tip stabilisers excluding bracket
J14. Headrest and bracket
J15. Crossbar 605 mm
J15. Crossbar 665 mm
J16. Heel straps
J17. Chest belt
J18. Positioning belt
English
Check that both sides have been adjusted to the same
height as otherwise stability can be reduced. G8. Do
not use the chair if the bolt (orange) is not locked.
H2. Various height adjustment options are available by
moving the locking pin. The legrests have 6 different
height settings.
See Figure J
J19. Hemiplegic armrest
J20. Armrest lock
J21. Angle adj. footrest
J22. Soft back pad
J23. Tilter
J24. Widening kit
J25. Soft Comfort seat
J26. Soft Comfort seat - narrow opening
J27. Comfort padding
J28. Trunk support
J29. Armrest cushion, pair
J30. ROHO pressure-relieving cushion
J31. Pan
J32. Lid with handle
J33. Amputee legrest
J34. Soft cushion - standard opening
J35. Soft cushion - oval opening
J36. Motor kit
17
Etac / Swift Mobile / www.etac.com
See Figure G
See Figure H
See Figure I
See Figure J