Troubleshooting - Omron NE-C803 Instruction Manual

Troubleshooting

Check the following if the device should fail during operation.
Problem
Nothing happens Is the AC adapter connected
when the power switch correctly to a power outlet and
is pressed. the compressor?
No nebulization or Is there medication in the
low nebulization rate, medication tank?
when the power is on.
Is there too much/little
medication in the medication
tank?
Is the vaporizer head missing
or not assembled correctly?
Is the nebulizer kit assembled
correctly?
Is the nozzle blocked?
Is the nebulizer kit tilted at a
sharp angle?
Is the air tube connected
correctly?
Is the air tube folded?
Is the air tube blocked?
Is the air filter dirty?
The compressor is Is the air filter cover attached
abnormally loud. correctly?
The compressor is Is the compressor being
very hot. covered?
Note: If the suggested remedy does not solve the problem, do not try to repair the
device - the device are not user serviceable. Return the device to an authorized
OMRON retail outlet or distributor.
Cause
Check that the AC adapter is connected to
a power outlet and the compressor. Unplug
then reinsert the plug if necessary.
Add the correct amount of medication to
the medication tank.
Attach the vaporizer head correctly.
Assemble the nebulizer kit correctly.
Make sure that the nozzle is free of
blockages.
Make sure that the nebulizer kit is not tilted
at an angle of more than 45 degrees.
Make sure that the air tube is correctly
connected to the compressor and nebulizer
kit.
Make sure that the air tube is not twisted or
bended.
Make sure that the air tube is free of
blockages.
Replace the air filter with a new one.
Attach the air filter cover correctly.
Do not cover the compressor during
operation.
Remedy
17
EN