Table of Contents
Advertisement
8. POWER SUPPLY from DC
ADAPTER
The meter also can supply the power supply from the DC
9V Power Adapter. Insert the plug of Power Adapter into
" DC 9V Power Adapter Input Socket " ( 3-9, Fig. 1 ).
9. BATTERY REPLACEMENT
1) When the left corner of LCD display show "
is necessary to replace the battery. However, in-spec.
measurement may still be made for several hours after
low battery indicator appears before the instrument
become inaccurate.
2) Loose the " Screw of the battery cover " ( 3-13, Fig. 1 )
and take away the " Battery Cover " ( 3-12 Fig. 1 ) from
the instrument and remove the battery.
3) Replace with DC 1.5 V battery ( UM4/AAA,
Alkaline/heavy duty ) x 6 PCs, and reinstate the cover.
4) Make sure the battery cover is secured after changing
the battery.
10. SYSTEM RESET
If the meter happen the troubles such as :
CPU system is hold ( for example, the key button can
not be operated... ).
Then make the system RESET will fix the problem.
The system RESET procedures will be either following
method :
During the power on, use a pin to press the " Reset
Button " ( 3-15, Fig. 1 ) once a while will reset the
circuit system.
19
", it
Advertisement
Table of Contents
