Remote Computer / Terminal - Branson Digital Sonifier 250 User Manual

Digital Sonifier
Table 6-3: Remote Terminal Commands
Command Terminal Displays
!T
TIME=
!MT
MAX TEMP=
!PO PULSE ON=
!POF PULSE OFF=
!PPT
PULSE TEMP=
!SV PRESET ID#
!R
PRESET ID#
!RP List of parameters
!S Report
!P
N/A
!H EXPERIMENT PAUSED
TUNING TEST
!TS
PLEASE WAIT 2 SEC.
!KL * KEYPAD DISABLED *
EXPERIMENT RUNNING
!ON
(displayed every 5 seconds)
!OFF
EXPERIMENT STOPPED
100-214-239 Rev. A
Remote Computer or Terminal
User / System Action
Type a value for the time, and press Enter on your
remote computer or terminal.
Type the maximum temperature, and press Enter on
your remote computer or terminal.
Type the time period when power will be on, and press
Enter on your remote computer or terminal.
Type the time period when power will be off, and press
Enter on your remote computer or terminal.
Type the Pulse Temperature, and press Enter on your
remote computer or terminal.
Type the identifying number under which you want to
save the preset parameter values, and press Enter on
your remote computer or terminal.
Type the preset ID number for the saved set of param-
eters you want to use, and press Enter on your remote
computer or terminal.
The system displays all the current parameters on the
remote computer or terminal.
The system sends a report to the remote computer or
terminal.
The system sends a report to the printer.
The experiment is currently paused.
Issuing another pause command from the remote
terminal will cause the experiment to resume, if the
experiment is currently paused.
Ultrasonics are activated for a two-second test.
The keypad is disabled, or enabled if it was already dis-
abled.
The experiment is running from a remote command.
The experiment has been stopped.
6-35